In this exercise we will work through a standard customer address sample.
From the Remote Sampler home screen, tap on the Samples button.
Work through the wizard in the same way as for the previous exercise. For the purposes of this exercise, make sure to select Ashington as the Sample Area.
Continue to work through the wizard until the confirm address screen is reached.
Customer addresses will not have barcodes that can be scanned with the device to confirm arrival. Instead, tap the Accept Address button to confirm that access the given customer property has been granted. Tap the Next button to show the onsite test screen.
Work through the rest of the sampling screens for this sample in exactly the same manner as for the previous exercises.
For the purpose of this exercise, enter values of your choice for all fields except “Flush Customer Tap” here enter Yes.
In some cases, a flush of the tap may be required. In this training exercise, selecting yes for Flush Customer Tap will show the Flush Tap screen and will prevent any further progress with the sampling process until the countdown has completed. It is advisable to avoid this during the training session by selecting No for this on-site test.
Complete the remaining screens for this sample and send it to LIMS to complete this exercise.
The barcode for the bottle in this sample is shown below.
Ensure to select No when asked if this is the last sample of the day.